Support

KB-00006 - Using a Tether with the Garmin Varia Arm

KB-00006 - Using a Tether with the Garmin Varia Arm

Using a Tether with the Garmin Varia Arm KB-00006 2020-07-01 Information:You would like to use a safety tether with the Garmin Varia mount arm. Prerequisites:You must have a fresh tether hoop to attach to the Garmin.  If you already have the tether and have attached it, you will have to remove it and the hoop cannot be reused.  If you have used both hoops provided, contact Bup Labs to acquire additional tether hoops. Instructions:First remove the mount arm from the mount.  Attach the Garmin Varia to the mount arm. Next attach the tether hoop to the left side of the...

Read more →


KB-00005 - UMS Mount Arm for Garmin Varia Upgrade

KB-00005 - UMS Mount Arm for Garmin Varia Upgrade

UMS Mount Arm for Garmin Varia Upgrade KB-00005 2020-06-30 Information:If you recently purchased a qualifying UMS mount arm for Garmin, you may be eligible for an upgrade to the new UMS mount arm for Garmin Varia. How the Upgrade Program Works:First ensure you have a qualifying Garmin arm (see below).  Then you will need to place an order for the upgraded mount arm. The mount arms are heavily discounted (50% off) and include the mount arm and a rubber retention ring. Upgrade Cost:US customers will pay the published price plus flat rate shipping. International customers will pay the published price...

Read more →


KB-00002.3 - UMS for Fizik ICS Compatibility

KB-00002.3 - UMS for Fizik ICS Compatibility

UMS for Fizik ICS Compatibility KB-00002.3  2021-05-21 Issue: You would like to know more about the UMS mounts compatibility with different Fizik ICS slot styles Information: The Fizik ICS slot is a optional mount standard found on most Fizik saddles.  Some new and OEM Fizik saddles do NOT include an ICS slot.  If your saddle has an ICS slot, it will typically be covered by the Fizik logo clip-in badge as shown in the picture below. Compatibility:None of the 2020 Fizik Argo saddles are compatible.  They all lack the ICS slot.  Certain bike manufacturer OEM variants (i.e., Canyon) are also not compatible...

Read more →


KB-00004 - Mount Sizing Helper

KB-00004 - Mount Sizing Helper

Mount Sizing Helper KB-00004 2019-12-31 Information:We realize that sometimes a picture is worth a thousand words, so we created a template that our customers can use to estimate mount sizing and positioning options. How To Use:Simply download the PDF document below, and print it at 100% scale (do not select shrink to fit).  Verify that the scale is correct by comparing the ruler printed on the page with a real ruler. Cut out the mount of interest, and position it on the saddle or seat post where it would be installed.  Cut out extensions and arms, and tape them together with...

Read more →

If you don't find what you are looking for, you can always contact us for more assistance.