GARMIN AND MAGENE ARMS MUST BE PURCHASED SEPARATELY!
(see compatible options)
NOTE: No mount arm is needed for GoPro, similarly attached devices, or the Garmin eRTL615, but a safety tether is recommended.
This is our newest 7th generation direct mount base for Fizik ICS equipped saddles (see pictures). The mount uses the OEM accessory slot (ICS slot) on certain equipped Fizik saddles. Look for a removable name plate on the back of the saddle to determine if your saddle has the ICS slot (see below for more details). The mount is designed to securely position a Garmin Varia, Magene radar, or camera for optimal visibility and operation.
Made in USA
| Compatibility | Features |
|---|---|
|
|
INTENDED USE
 |
This mount is intended for use with bicycles used on paved or relatively smooth unpaved surfaces. Our mounts can be used with electric bikes up to class 3. ASTM International standard F2043-13. |
7th Generation Improvements
| Based on user feedback, and when paired with a TC mount arm, the mount point towards the saddle can be reduced by 25 mm (1 in). This increases the leg over clearance and makes it less likely to catch the mount when mounting and dismounting the bike. |  |
|---|
 |
Based on community feedback, we replaced the lock screw with a Nyloc screw with built in threadlocker. We also replaced the neck nut with a locknut. All screws are now heavier cap head screws making them much harder to strip and easier to tighten. These changes eliminate the need for messy threadlockers while preventing screw loosening. |
|---|
| The TC arm for Garmin or Magene paired with the Fizik mount base moves the center of gravity below the rotational point. This means the Varia applies less torque on the quarter-turn insert and will be less likely to rotate under heavy impacts. |  |
|---|
Saddle Compatibility
This mount is compatible with saddles that have a compatible built in ICS slot. If your saddle does not have this, this mount will not work. Use an Anatra mount instead. Not all ICS slots will work, some are closed-back - check the compatibility article for details.
The Garmin Varia, GoPro, saddle bag, and saddle are shown for illustrative purposes only and are not included.
This product is not affiliated with, endorsed by or in any way associated with GoPro Inc. or its products and services. GoPro, HERO and their respective logos are trademarks or registered trademarks of GoPro, Inc..
This product is not affiliated with, endorsed by or in any way associated with Garmin Inc. or its products and services. Garmin, Varia and their respective logos are trademarks or registered trademarks of Garmin, Inc.
 |
This mount is intended for use with bicycles used on paved or relatively smooth unpaved surfaces. Our mounts can be used with electric bikes up to class 3. ASTM International standard F2043-13. |
BUP Shark Tooth (ST)
What makes the Shark Tooth design different?
- ST Mounts use toothed connections to prevent slipping.
- Connections are very rugged and more than 3x thicker than GoPro type connections.
- Very easy to assemble using the provided thread locking screws.
- Eliminates the variations in GoPro like slot fitments for a more secure connection.
|---- Space ----|
- Our mounts move the device down and rearward to increase spacing.
- Bup mount positioning creates more leg over clearance for easier mounts and dismounts.
- Leaves more than enough room for most small/medium and even some large bags.
- Optional extensions can provide even more space when needed!
Safety is not an afterthought
- Safety band prevents twist out release from impacts, aggressive riding, opportunistic theft, and accidents.
- Safety bands will not interfere with, or mute, radar range or operation.
- New elastic safety tethers are thin and exactly the same as the Garmin OEM computer tether.
- Heavy duty safety tethers are provided with kits for heavier devices such as a GoPro or Garmin Varia RCT715.
Shark Tooth Grip
One huge benefit of the new Shark tooth design is preventing device rotation. Standard action camera connectors typically suffer from rotation under loading which requires overtightening the screw to overcome the rotation.
Overtightening can eventually lead to damage or failure.
ST mounts use just one thread locking screw for easy assembly.
Just tighten normally and it is locked in place. Easy peasy.
Have Your Cake And Eat It Too
Radar and a GOOD camera? Yes please! Extra room for big saddle bags? Yes please! Pick one or the other? Nope! Bup horizontal mount arms provide a huge amount of space below the saddle AND the option to run two devices at once!
Garmin
Compatibility
Besides being able to use all major brands of radars, our ST mount arms can be converted from one brand's radar to another. Switching between Garmin Varia and Magene require nothing more than unscrewing the insert and moving a few plugs. Conversion from Garmin or Magene to Bryton (or vice versa) is almost as easy with an extra insert (sold separately).
Magene
Quality
Our mounts bases and arms are 3D printed with state-of the-art bioplastic materials using the most technologically advanced machines in the world. Even small injection molded items, such as the quarter-turn inserts, are top-of-the-line and as good or better than the OEM part.
Image: Cutaway of Bup quarter-turn insert on the left compared to the common import mount variety on the right.
What are these products made out of?
Our mounts are made from a new state-of-the-art material called bio-plastic that is derived from plants instead of petroleum. It is stronger than traditional plastic and able to withstand repeated impacts better. Some components are made from injection molded plastic or steel.
Where are your products made?
We source all raw materials, manufacture the primary components, assemble, and package the products in the United States. Some accessory items or minor components are imported (noted in the product details).
Do you ship to my country?
We currently ship within the U.S., most U.S. territories, and Canada. Please see the international shipping page for more details.
All BUP mounts are manufactured and hand assembled in the USA
Patent # US D902,014 S, D893,285 S
The Garmin Varia, Bryton radar, Magene radar, GoPro, saddle bag, and saddle are shown for illustrative purposes only and are not included.
This product is not affiliated with, endorsed by or in any way associated with GoPro Inc. or its products and services. GoPro, HERO and their respective logos are trademarks or registered trademarks of GoPro, Inc..
This product is not affiliated with, endorsed by or in any way associated with Garmin Inc. or its products and services. Garmin, Varia and their respective logos are trademarks or registered trademarks of Garmin, Inc.
This product is not affiliated with, endorsed by or in any way associated with Magene Inc. or its products and services. Magene and their respective logos are trademarks or registered trademarks of Magene, Inc.
This product is not affiliated with, endorsed by or in any way associated with Bryton Inc. or its products and services. Bryton and their respective logos are trademarks or registered trademarks of Bryton, Inc.