Anatra™ Gen 4 Universal Saddle Mount for Garmin Varia

BLA00351

In stock, usually ships in 1-2 business days

Mount your Garmin Varia light to your saddle where it is the most visible, and where it won't interfere with your saddlebag!

Our 4th Generation Anatra universal mount is designed to adapt to most saddle rails (see details below).  The mount has very flexible mounting options for positioning the Garmin or camera for optimal operation.

NOT COMPATIBLE WITH VARIA MODEL RCT715 (Radar + Camera)

Made in USA



Compatibility Features
  • Garmin Varia RTL500, RTL510, RTL515, RVR315, Garmin Varia Rearview
  • Rated for devices that weigh up to 150g (1/3 lb)
  • Fits rear saddle rails with a width between 35 and 70 mm (1-3/8" to 2-3/4")
  • Fits saddle rail thickness between 6.5 and 10 mm
  • See details below before ordering
  • Lightweight (68g) and aerodynamic
  • Anti-slip pads prevent movement on the rails
  • Carbon fiber safe contact pads - no metal digging into your rails
  • Securely attached - cannot be removed without tools
  • Locknuts used on all connections that prevent loosening
  • Fully adjustable elevation with a non-slip interface
  • Places the Varia 75 mm (3 in) from the clamp point
  • Extend the mount point with common GoPro extensions (optional)
  • Rubber ring prevents Varia twist out from side-to-side motion
  • Includes a safety tether that ensures your device stays with your bike

INTENDED USE

Usage rating 

This mount is intended for use with bicycles used on paved or relatively smooth unpaved surfaces. Our mounts can be used with electric bikes up to class 3. ASTM International standard F2043-13.


4th Generation Improvements

Anatra locknuts

Based on community voting, we replaced all nuts with locknuts to eliminate the need for threadlocker and ensure screws can't loosen.

Anti-slip pads have been integrated into the mount. They are tough and remain carbon rail safe. The back of the clamp also includes a new tab that keeps the body and clamp in alignment for improved grip. Anatra clamp pads and alignment tab
Anatra neck improvements The neck joint has been strengthened by 50% over the previous generation. It can better withstand accidental sideway impacts that catch the device or neck.
The neck has been thickened and reshaped to accommodate larger devices with bigger footprints and weight. Anatra neck changes
Reduced device rotation The new Garmin arm paired with the Anatra moves the center of gravity below the rotational point. This means the Varia applies less torque on the quarter-turn insert and will be less likely to rotate under heavy impacts.

Saddle Compatibility

To check your saddle's compatibility with the Anatra, measure the width between the rails.  The width must be between 35 mm (1-3/8") on the inside, and 70 mm (2-3/4") on the outside.  The rails can be round or oval and must be between 6.5 and 10 mm thick.  You must have approximately 25 to 35 mm (1" - 1.5") of clearance between the mount point and the bottom of the saddle.  The back center top of the saddle must be clear of obstructions in this area (such as large logo plates - we are looking at you Selle...  :)


All BUP mounts are manufactured and hand assembled in the USA

Patent # US D902,014 S, D893,285 S


The Garmin Varia, GoPro, saddle bag, and saddle are shown for illustrative purposes only and are not included.

This product is not affiliated with, endorsed by or in any way associated with GoPro Inc. or its products and services. GoPro, HERO and their respective logos are trademarks or registered trademarks of GoPro, Inc..

This product is not affiliated with, endorsed by or in any way associated with Garmin Inc. or its products and services. Garmin, Varia and their respective logos are trademarks or registered trademarks of Garmin, Inc.